So, based on my 2.5 month observations, I am extremely pleased with my progress thus far on Nanoscalp, Juveline, and ScalpExtreme. I REALLY hope things continue to progress in a positive direction. My question for my fellow elsom users is... what products have you seen the most results from? I woul...

Is this still going ahead in October as was scheduled after the last delay?

Thanks

Thanks for that .Im going to go with the elmers glue its just thatit will take a few days to do with that stuff as it takes 4 hrs to set

I now I've asked this question before but I just want to make sure as I got a few mixed messages last time. I've all 490 diodes in my helmet now with some of the level 2 connections soldered and heatshrinked but they do seem to come loose a little and the odd one pops out.This is fixable but a bit o...

Im not too sure a fibre glass helmet work buddy. I tried a fabric (small pile fleece beany hat) soaked in epoxy resin and streached over a pre-made mould.It worked fine-ish ,but when I had to drill holes in it it started to fall to peices. It was really robust but the diode spacing is just too close...

Whoa,they do so many types,whats the exact type that makes the diodes de mountable?

Elmers glue,is that just generic to the US then?

Thanks for that.
Got the new power suppply up and running.The last one was 400 W and gave out 22 amps @3.3 V.This one is 500 W and only gives out 15 amps at 3.3V.Can you explain that.

Is it neccesary to glue the diodes into the helmet,Ive just pushed in around 280mat the moment and they seem to be holding OK. Just once i diodes been glued,if it fails its sure gonna make a mess of the foamie. I got 400 from Aixiz and Ive had 2 failures before i even fitte dthem. Do i send these ba...

I'm pretty sure I've busted it with earlier wrong connection's as I've got it wired up correctly now and nothing,not even a milli volt as I've had my meter across it.
I'll get another one offa e-bay

Hey John I think the protocol is a few times per week for about 15 mins and the trick is not to let it dry.Some apply to hair but I'm wary so I squirt it under my arms then shower a while later....can sting a bit.

Would it normally denote the sensing line on the label? I think its a good guess that its the thinner violet one as its got s+ next to it and I have violet instead of orange. Do I need to put some load on it to make it work as per the link on OMG's site that lemming gave him.Its a clip on U-tube and...

http://www.twenga.co.uk/dir-Computers,C ... upply-7797

Its the one at the bottom of the page.

My multimeter has just packed up...... Joine dthe black and grey wires together and the fans came on so were getting somewhere but it wouldnt light a few diodes up.Maybe I've broken it.I'm getting a new meter of the net as we speak so I can seee if it's kicking out any amps. make and model no eTECH ...

Wow,thanks for all that.I'd never have thought such info would be online as its pretty random subject. Just noticed the 'PS' next to the grey wire so with the info youve given I'll try and get it going when I return home from work. Anything else or when I get it going I'll give you a shout. I'll use...

Happyman,can you shed any light on this buddy

Thats all Im using,Ive soldered the diode wires together,stripped the plastic of the connector block and just used the brass terminal.Then when the 2nd level wires in the connector aswell I'm heatshrinking the connection.Should give a more streamlined finish.

Happyman, Re your instructions on Regrowth I dont have a green wire but I do have a single orange wire. Idont have a single purple wire either just a brown. So what Im proposing is where you have GREEN,grey,white PURPLE and blue I have ORANGE,grey,white BROWN and blue My 3.3v wires are coloured purp...

1st in the cue OMG.
All I can say is 'so very admirable' and I'll guess you'll know what I mean.
We'll all get used to things around here very soon.

Many thanks and definately the right move.